T: +44 (0) 1473 742325
E: This email address is being protected from spambots. You need JavaScript enabled to view it.
Contact Us

Christy X Mill

Models X380, X660 and X960

A Range of High Capacity Versatile Direct Drive Dual Rotation Hammer Mills

TYPICAL APPLICATIONS:

  • Grain Grinding - Maize, Wheat, Barley, Oats
  • Fine Grinding - Animal Bedding, Pelleting or Briquettes
  • Energy from Waste - Waste Timber, Chipboard, Ply, MDF
  • Co-firing - Regrinding of Pellets

 

SPECIFICATION:

  • The Christy X380, X660, and X960 are High Speed, Direct Drive, Dual Rotation Hammer Mill Grinders which are available in models from 75 to 220 kW.  

 

DESIGN FEATURES:

  • Choice of beater with different profiles and tip clearances to fine-tune the output particle distribution
  • Lobed rotor design assists with grinding process and induces airflow through the mill
  • Perforated plate screens are attached to quick change screen frames that slide in from the side of the mill
  • Safety interlocks prevent the screens being removed when the mill is running
  • Screens cover the maximum possible perimeter of the rotor to maximise throughput
  • Hardened beater pins
  • Dual rotation (halves the frequency of beater changes)
  • Anti-vibration mounts under the mill base isolate it from the surrounding structure and can be supplied complete with friction mounting pads to eliminate the need for foundation bolts
  • Three cast serrated grinding blocks are fitted around the screens, which not only assist with the grinding process, but also reduce load and wear on the beaters
  • Major structural components are manufactured from cast iron to provide a rigid, long-lasting construction
  • Adjustable air intakes either side of the inlet allow air to be drawn over the outside of the screens, helping sweep away the ground product and prevent screens from blinding

xmill diagram

MODEL

kW

RPM

Screen Area (m²)

Dimensions (mm)

Approx wt in Tonnes (incl. motor)

Size of Inlet

L1 X W1 (mm)

A

B

C

D

X380

75

3000

0.57

288

691

958

390

1.8

425 x 272

X660

110

3000

1.00

450

1015

1282

715

2.1

749 x 272

 

160

3000

1.00

450

1015

1282

715

2.5

749 x 272

X960

185

3000

1.23

545

1203

1469

900

2.9

933 x 272

 

225

3000

1.23

545

1203

1469

900

3.2

933 x 272

Machine capacities will depend upon the size and condition of material fed into it and the required output. Please contact us with your material and project requirements for expert advice on machine selection.

 

Contact Information

Knightsdale Road, Ipswich, Suffolk, United Kingdom,  IP1 4LE
T: +44 (0)1473 742325  |   F: +44 (0)1473 462773  |  E: This email address is being protected from spambots. You need JavaScript enabled to view it.

Terms & Conditions  |  Sitemap
Developed by Identity   |  © Copyright  Christy Turner Ltd

Login

Log in to your account or